ESdat Forums
»
Forums
»
ESlog
»
Generating a riser stickup in the logs
 Rank: Newbie
Groups: Registered
Posts: 2  Location: Perth
|
Hello,
I'd like to know if it is possible to generate an image of a PVC riser of 0.7m above ground when creating a well log on the free eslog well construction log.
When I did it and tried to include that it was 0.7m above ground it created problems with the rest of the log (negative depths, etc) and not much in regard to a visual indicator of the riser.
Has anyone else had problems with this and found a solution?
|
|
|
|
|
|
 Rank: Administration
Groups: Registered, Administrators Posts: 327  Was thanked: 29 time(s) in 29 post(s)
|
Hi Eric, Thanks for question about ESlog. With regards to completion descriptions, or graphics for well completion (risers, stickups, flush, etc), ESlog doesn't currently support this. However, you can set the Start Depth (near Depth per page and End Depth) to a negative number which will push the body of the log further down the page, and then use negative numbers when entering your casing data. This may not give you exactly what you want, but would be worth a try. Thanks, Nick
|
|
|
|
|
|
Rank: Newbie
Groups: Registered
Posts: 2 Location: Perth
|
Thanks for your help Nick. Let us know if this option changes in the future.
|
|
|
|
|
|
ESdat Forums
»
Forums
»
ESlog
»
Generating a riser stickup in the logs
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.