ESdat Forums
»
Forums
»
ESdat
»
ESdat Server - Environmental Standards
 Rank: Advanced Member
Groups: Registered
Posts: 84
Thanks: 2 times
|
If I filter for a specific site then change the filter for a different site, the standards for the first site are shown in addition to the standards for the second site and so on. Is there something I should be dooing between filtering for each site?
|
|
|
|
|
|
 Rank: Administration
Groups: Registered, Administrators Posts: 327  Was thanked: 29 time(s) in 29 post(s)
|
Hi Nick,
When you change a filter, it retains the current Chem Profile and Chem Layout settings including unsaved changes.
This means that any Env Standards that are turned on (i.e. saved to the Layout, or specific to the previous Site filter), will still be enabled if you change the Site filter. The only thing that will change is any new Site Specific standards will be turned on.
I take it this is what you are seeing.
If you only want to show the Env Standards related to the Site you have filtered, you just need to reset the Layout by clicking the "Undo Changes" button after you've applied your new filter. This will reset the Layout to the last saved state.
So if you have a Layout with no Standards enabled, this should meet your objective as you will then only see the Standards that are Site Specific.
 Undo.PNG (24kb) downloaded 0 time(s).
Cheers
|
|
|
|
|
|
Rank: Advanced Member
Groups: Registered
Posts: 84
Thanks: 2 times
|
|
|
|
|
|
|
ESdat Forums
»
Forums
»
ESdat
»
ESdat Server - Environmental Standards
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.