Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Custom templates
Options
Go to last post Go to first unread
Previous Topic Next Topic
REV2015  
#1 Posted : Wednesday, December 18, 2019 12:52:23 PM(UTC)
REV2015
Rank: Member

Reputation:

Groups: Registered
Posts: 26

Thanks: 1 times

Hi guys,

We modified one of the existing tempaltes to remove some columns and widen the width of the remaining columns which achieved the desired result, however it appears the the first letter of some of the material description entries and Additional observations dissapears. E.g.:

'SILTY CLAY' becomes 'ILTY CLAY'

'No hydrocarbon staining' becomes 'o hydrocarbon staining'

Attached is the file saved as .wpd for the purposes of allowing upload here.

Have n this type of error been seen before?

Environmental Well-custom.wpd.ESlog (6kb) downloaded 1 time(s).

Back to top

Wanna join the discussion?! Login to your ESdat Forums forum accountor Register a new forum account.
Back to top  
Nick Tumney  
#2 Posted : Wednesday, December 18, 2019 1:32:31 PM(UTC)
Nick Support
Rank: Administration

Reputation:

Groups: Registered, Administrators
Posts: 322
Canada

Was thanked: 29 time(s) in 29 post(s)

Hi,

The ESlog templates only control the layout, not the actual content, of the log.

The content is translated from ESdat to ESlog using a GEDTS file.

If you're using ESdat Desktop, I recommend looking at the gedts files in your template directory to see if any have been modified recently.

You can also try using the one from your ESdat installation directory to see if this resolves the issue.

If you're using the web-interface, the gedts can be checked under the ESlog section of Licencee management: http://ESdat.net/ESdat_Server_Help/eslog.htm

If you're using this, you'll need to check that your configuration is referencing the correct template and gedts.

Cheers,

Nick
Back to top
WWW
REV2015  
#3 Posted : Wednesday, December 18, 2019 4:06:49 PM(UTC)
REV2015
Rank: Member

Reputation:

Groups: Registered
Posts: 26

Thanks: 1 times
Hi Nick, We copied the content of an unedited ESlog gedt file from the program file directory into the standard ESlog configuration section of ESdat web, however this issue persists when we select the standard template. How can we revert the standard ESlog templates in ESdat web? Thanks
Back to top
Nick Tumney  
#4 Posted : Thursday, December 19, 2019 12:01:33 PM(UTC)
Nick Support
Rank: Administration

Reputation:

Groups: Registered, Administrators
Posts: 322
Canada

Was thanked: 29 time(s) in 29 post(s)

Hi Ben,

I've restored the Standard GEDTS file in your Web Interface, and the default templates are now working as expected (it's slightly different to the one used by ESdat Desktop).

I would definitley recommend not editing this file in the future, but create a new one based off of it.

I'd be curious to know if you update your ESlog configuration to use the default GEDTS resolves the issue with your custom template.

Cheers,

Nick

Back to top
WWW
Similar Topics
Uploading custom templates into ESdat (ESdat)
by sthompson 7/28/2010 5:41:54 PM(UTC)
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET